Prowler Trailer Stand

Our stand allows you to store your Prowler
trailer in a floor space of only 31" x 70" and
under 100" of ceiling height.
Your trailer can easily be stood upright by only
one person using the stand. The rollback
tubes are easily removed for towing while the
receiver brackets stay mounted on your
trailer's axle flange, neatly hidden from vision
when towing or showing your trailer.


When you are ready to stand your trailer
upright, you just insert the tubes and tighten
the thumbscrews. You're ready to tip your
trailer upright. The  stands are easily installed
and include DUAL SAFETY tip stops to prevent
accidental tipping of the trailer.


Utilizing heavy duty construction and finished
in semi gloss black powder coat.


If you have an extremely low ceiling height:
The total height required in the upright
position with a full length draw bar is just
under 100 inches.


The tongue however is easily removable and
the body of the trailer alone will be about 60"
tall. If you remove the tongue before standing
the trailer upright, you will need to insert a
short temporary piece of tubing to lift with.
This will increase your leverage and will make
it a 2 person job to stand the trailer upright.
Normally this is not a big problem but you will
need to be sure that you have someone to
help or that you yourself are moderately
strong.
LD164 Trailer Stand  $325

Temporarily unavailable until spring
Our Prowler Trailer Upright Storage Stand will now
allow you to STORE YOUR PROWLER AND TRAILER IN
ONE NORMAL PARKING SPACE IN YOUR GARAGE!!!!